Processing parameters: Difference between revisions

Latest revision as of 19:05, 6 June 2024

Choose the lowest wavenumber of spectral estimation – fft-length.
Choose the length of data (in meters) used for each dissipation estimate – diss-length.
Choose a high-pass filter cut-off frequency to be consistent with duration of the fft-length.
Choose de-spiking parameters.
Choose vibration-coherent noise removal.

Please note that most choices made must be included in a data set, as described in the list of meta data.

@@ Line 1: / Line 1: @@
-* Choose the length of data (in meters) used for each dissipation estimate – [[diss-length]].
+:# Choose the lowest wavenumber of spectral estimation – [[fft-length]].
-* Choose the lowest wavenumber of spectral estimation – [[fft-length]].
+:# Choose the length of data (in meters) used for each dissipation estimate – [[diss-length]].
-* Translate (a) and (b) into [[duration]] (time).
+:# Choose a [[high-pass filter cut-off frequency]] to be consistent with duration of the [[fft-length]].
-* Round these up to nearest power-of-two number of samples.
+:# Choose [[de-spiking parameters]].
-* Choose a [[high-pass filter cut-off frequency]] to be consistent with (b).
+:# Choose [[vibration-coherent noise removal]].
-* Choose [[de-spiking parameters]].
-* Choose [[vibration-coherent noise removal]].
+Please note that most choices made must be included in a data set, as described in the [[Netcdf meta data (shear probes)|list of meta data]].
+-----------------------------
+return to [[Flow chart for shear probes]]
+[[Category:Shear probes]]