Quality control coding: Difference between revisions
From Atomix
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 22: | Line 22: | ||
| Bit 0 | | Bit 0 | ||
| Poor figure of merit | | Poor figure of merit | ||
| | | 1.15 | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
| Line 29: | Line 29: | ||
| Bit 1 | | Bit 1 | ||
| Large fraction of data with spikes | | Large fraction of data with spikes | ||
| | | 5% | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
| Line 36: | Line 36: | ||
| Bit 2 | | Bit 2 | ||
| Anomalously large disagreement between dissipation estimates from probes | | Anomalously large disagreement between dissipation estimates from probes | ||
| | | 2.772 | ||
| 1 | | 1 | ||
| 4 | | 4 | ||
| Line 43: | Line 43: | ||
| Bit 3 | | Bit 3 | ||
| Too many iterations of despiking routine | | Too many iterations of despiking routine | ||
| | | 8 | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
Latest revision as of 09:18, 28 August 2023
[In progress]
Shear-probe quality-control flags
The Q (quality control) flags associated with shear-probe measurements are bitwise flags with boolean values which are CF compliant. More information available here: https://mplnet.gsfc.nasa.gov/about-flags
Every dissipation estimate from every probe must have Q flag. The numerical values of the Q flags are as follows:
| Flag Mask | Bit | Flag Meaning | Example threshold value | Ex: True =1 / False =0 | Ex: Q value |
|---|---|---|---|---|---|
| 1 | Bit 0 | Poor figure of merit | 1.15 | 0 | 0 |
| 2 | Bit 1 | Large fraction of data with spikes | 5% | 0 | 0 |
| 4 | Bit 2 | Anomalously large disagreement between dissipation estimates from probes | 2.772 | 1 | 4 |
| 8 | Bit 3 | Too many iterations of despiking routine | 8 | 0 | 0 |
| 16 | Bit 4 | Insufficient variance resolved | 50% | 1 | 16 |
| 32 | Bit 5 | manual flag to be defined by user | N/A | 0 | 0 |
| 64 | Bit 6 | manual flag to be defined by user | N/A | 0 | 0 |
| 128 | Bit 7 | manual flag to be defined by user | N/A | 0 | 0 |
| Final Q = 20 |
The Q flags are combined by their addition. For example a Q value of 20 means that the dissipation estimated failed both dissipation ratio limit test and the resolved variance test. A value of 255 means that all tests failed. The reasons for a failure can be decoded by breaking the value of Q down to its powers of 2.
return to Flow chart for shear probes
