Along-beam bin center separation: Difference between revisions
Jmmcmillan (talk | contribs) No edit summary |
m Categorization |
||
| Line 12: | Line 12: | ||
where <math>\theta</math> is the angle of the diverging beams with the <math>Z</math>-axis. | where <math>\theta</math> is the angle of the diverging beams with the <math>Z</math>-axis. | ||
[[Category:Velocity profilers]] | |||
Revision as of 15:48, 23 November 2021
[PLACEHOLDER -- NEED TO CONFIRM THIS IS CORRECT AND/OR ADD PICTURE]
For ADCPs, the [math]\displaystyle{ Z }[/math]-axis in instrument coordinates is commonly defined along the axis of the ADCP pressure case. The velocity data are commonly given in terms of this [math]\displaystyle{ Z }[/math]-coordinate. For a vertical beam, the along beam bin center separation ([math]\displaystyle{ r_0 }[/math]) is given by:
[math]\displaystyle{ r_0 = z }[/math]
where [math]\displaystyle{ z }[/math] is the distance from the transducer along the [math]\displaystyle{ Z }[/math]-axis.
For diverging beams, the along beam bin center separation ([math]\displaystyle{ r_0 }[/math]) is given by:
[math]\displaystyle{ r_0 = \frac{z}{\cos\theta} }[/math]
where [math]\displaystyle{ \theta }[/math] is the angle of the diverging beams with the [math]\displaystyle{ Z }[/math]-axis.
