Rotation of the velocity measurements: Difference between revisions

From Atomix
mNo edit summary
m Input frame of reference
Line 6: Line 6:


The velocities are measured in either the instrument's coordinate system, beam coordinates or more rarely in the earth's coordinate system (east, north and up).  
The velocities are measured in either the instrument's coordinate system, beam coordinates or more rarely in the earth's coordinate system (east, north and up).  
* Include a diagram of frame of reference
* Scatter of velocities in enu coordinates.
** Light gray for entire timeseries
** Different colour for points over a given segment.
* Describe how the rotation is done (a sketch of an arrow, and a new frame of reference where the new x axis matches the mean flow direction).
* Describe how the rotation is done (a sketch of an arrow, and a new frame of reference where the new x axis matches the mean flow direction).
* What is used as the mean flow
* What is used as the mean flow
[[File:Frame of reference adv.png|400px|thumb|Examples of measured velocities from two ADVs highlighting that their x-axis may be un-aligned with the flow's. The blue dots and lines that represent the principal axes are for a 5-min subset of the entire timeseries shown in red.]]

Revision as of 14:43, 8 March 2022


Measured velocities must be rotated in the flow's frame of reference since inertial subrange model differs between the velocity components, and the effects of anisotropy are more pronounced in the transverse and vertical direction.

The velocities are measured in either the instrument's coordinate system, beam coordinates or more rarely in the earth's coordinate system (east, north and up).

  • Describe how the rotation is done (a sketch of an arrow, and a new frame of reference where the new x axis matches the mean flow direction).
  • What is used as the mean flow


Examples of measured velocities from two ADVs highlighting that their x-axis may be un-aligned with the flow's. The blue dots and lines that represent the principal axes are for a 5-min subset of the entire timeseries shown in red.