Quality control coding: Difference between revisions
From Atomix
Amelie Meyer (talk | contribs) No edit summary |
Amelie Meyer (talk | contribs) No edit summary |
||
| Line 33: | Line 33: | ||
| if despike_fraction > despike_fraction_limit | | if despike_fraction > despike_fraction_limit | ||
| Bit 1 | | Bit 1 | ||
| ? | |||
|- | |- | ||
| 4 | | 4 | ||
| if |log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon} | | if |log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon} | ||
| Bit 2 | | Bit 2 | ||
| ? | |||
|- | |- | ||
| 8 | | 8 | ||
| if despike_iterations > despike_iterations_limit | | if despike_iterations > despike_iterations_limit | ||
| Bit 3 | | Bit 3 | ||
| ? | |||
|- | |- | ||
| 16 | | 16 | ||
| if variance resolved > 50% | | if variance resolved > 50% | ||
| Bit 4 | | Bit 4 | ||
| ? | |||
|- | |- | ||
| 32 | | 32 | ||
| manual flag to be defined by user | | manual flag to be defined by user | ||
| Bit 5 | | Bit 5 | ||
| ? | |||
|} | |} | ||
Revision as of 19:16, 3 June 2022
In progress
Shear-probe quality-control flags
The Q (quality control) flags associated with shear-probe measurements are not compatible with the Ocean Sites Ocean Sites for quality control (QC) coding.
Every dissipation estimate from every probe must have Q flag. The numerical values of the Q flags are as follows:
1, if FOM > FOM_limit
2, if despike_fraction > despike_fraction_limit
4, if |log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon}
8, if despike_iterations > despike_iterations_limit
16, if variance resolved > 50%
32, manual flag defined by user
| Flag Mask | Flag Meaning | Bit | Example threshold value |
|---|---|---|---|
| 1 | if FOM > FOM_limit | Bit 0 | ? |
| 2 | if despike_fraction > despike_fraction_limit | Bit 1 | ? |
| 4 | log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon} | Bit 2 | ? |
| 8 | if despike_iterations > despike_iterations_limit | Bit 3 | ? |
| 16 | if variance resolved > 50% | Bit 4 | ? |
| 32 | manual flag to be defined by user | Bit 5 | ? |
The Q flags are combined by their addition. For example a Q value of 3 means that the dissipation estimated failed both FOM_limit test and the despike_fraction test. A value of 15 means that all tests failed. A failure of any one test ([math]\displaystyle{ Q\ne0 }[/math]) means that a dissipation test should not be trusted. The reasons for a failure can be decoded by breaking the value of Q down to its powers of 2.
