Level 1 data (shear probes): Difference between revisions
From Atomix
KikiSchulz (talk | contribs) mNo edit summary |
No edit summary |
||
Line 34: | Line 34: | ||
| ROLL || 1 || platform_roll_angle || degree || [TIME_FAST] || 2 | | ROLL || 1 || platform_roll_angle || degree || [TIME_FAST] || 2 | ||
|} | |} | ||
[[Category: Shear probes]] |
Revision as of 20:09, 28 October 2021
Level 1 data (shear probes)
Level 1 data refers to the full resolution data in physical units, e.g. the regularly sampled time series of converted shear probe data. If needed, a transfer function for shear is given. Below, a table with parameters included in the level 1 data set is compiled.
Numbers in the last column indicate:
- required=1 are the absolute minimum parameter required for a data set
- required=2 are preferred/recommended parameter
- required=3 are optional parameter
Parameter Name | CF parameter | Standard Name | Units of measurement | dimension | required |
---|---|---|---|---|---|
PRES | 1 0 |
sea_water_pressure water_pressure |
dbar | TIME_FAST | 1,2 |
TIME | 1 | time | days since 1950-01-01 00:00:00 UTC | TIME_FAST | 1 |
SHEAR | 0 | water_velocity_shear | s-1 | [TIME_FAST, n_shear_sensors] | 1 |
VIB | 0 | platform_vibration | NA | [TIME_FAST, n_vibration_sensors] | 2 |
ACC | 0 | platform_acceleration | m s-2 | [TIME_FAST, n_acc_sensors] | 2 |
TEMP | 1 (0) |
sea_water_temperature (water_temperature) |
degree_Celsius | [TIME_FAST,n_T_sensors] | 2 |
CNCD | 1 (0) |
sea_water_electrical_conductivity (water_electrical_conductivity) |
S m-1 | [TIME_FAST,n_C_sensors] | 2 |
GRADT | temperature_gradient | [TIME_FAST, n_gradT_sensors] | 3 | ||
GRADC | conductivity_gradient | [TIME_FAST, n_gradC_sensors] | 3 | ||
PITCH | 1 | platform_pitch_angle | degree | [TIME_FAST] | 2 |
ROLL | 1 | platform_roll_angle | degree | [TIME_FAST] | 2 |