|
|
Line 24: |
Line 24: |
| <math>^a</math> Typically we assume TIME for the fast-sampled microstructure channels, and for example, _SLOW or _CTD for slower sampled channels such as CTD and tilt sensors. If the application requires different time stamps for different sensors, this can be utilized like TIME_PITCH, TIME_ACC etc. | | <math>^a</math> Typically we assume TIME for the fast-sampled microstructure channels, and for example, _SLOW or _CTD for slower sampled channels such as CTD and tilt sensors. If the application requires different time stamps for different sensors, this can be utilized like TIME_PITCH, TIME_ACC etc. |
| <br> | | <br> |
| <math>^b</math> Please use these examples for related sensors: | | <math>^b</math> Please use these examples for related sensors:<br> |
| N_VIB_SENSORS for vibration (piezo-acceleration) sensors, <br> | | N_VIB_SENSORS for vibration (piezo-acceleration) sensors, <br> |
| N_ACC_SENSORS for vibration acceleration sensors, <br> | | N_ACC_SENSORS for vibration acceleration sensors, <br> |
Revision as of 13:19, 4 June 2022
Level 1 data refers to the full resolution data in physical units, e.g. the regularly sampled time series of converted shear probe data. If needed, a transfer function for shear is given. Below, a table with parameters included in the level 1 data set is compiled. The parameter names and definitions fit the NetCDF parameter attributes.
In the standard names, "sea_water" can be replaced with "water" if working in freshwater environments. This is specified in some entries below but not all.
Dimensions
Dimension short name |
description
|
TIME |
length of the record from turbulence (fast) data channels
|
TIME_*** [math]\displaystyle{ ^a }[/math] |
length of the record from the *** sensor (e.g., CTD or SLOW)
|
N_SHEAR_SENSORS |
number of shear channel (shear sensors)
|
N_***_SENSORS [math]\displaystyle{ ^b }[/math] |
number of *** channel (sensors)
|
[math]\displaystyle{ ^a }[/math] Typically we assume TIME for the fast-sampled microstructure channels, and for example, _SLOW or _CTD for slower sampled channels such as CTD and tilt sensors. If the application requires different time stamps for different sensors, this can be utilized like TIME_PITCH, TIME_ACC etc.
[math]\displaystyle{ ^b }[/math] Please use these examples for related sensors:
N_VIB_SENSORS for vibration (piezo-acceleration) sensors,
N_ACC_SENSORS for vibration acceleration sensors,
N_GRADT_SENSORS for thermistors,
N_GRADC_SENSORS for microconductivity sensors.
Required Variables
Parameter Name |
Standard Name |
Units of measurement |
dimension
|
TIME |
time |
Days since YYYY-MM-DDT00:00:00Z |
TIME
|
SHEAR |
sea_water_velocity_shear (or water_velocity_shear) |
s-1 |
[TIME, N_SHEAR_SENSORS]
|
Optional Level 1 Variables
Parameter Name |
Standard Name |
Units of measurement |
dimension
|
PSPD_REL |
platform_speed_wrt_sea_water |
m s-1 |
TIME [math]\displaystyle{ ^a }[/math]
|
VIB |
platform_vibration |
NA |
[TIME, N_VIB_SENSORS]
|
ACC |
platform_acceleration |
m s-2 |
[TIME [math]\displaystyle{ ^b }[/math], N_ACC_SENSORS]
|
TEMP |
sea_water_temperature (water_temperature) |
degree_Celsius |
[TIME_CTD [math]\displaystyle{ ^b }[/math], N_T_SENSORS]
|
CNCD |
sea_water_electrical_conductivity (water_electrical_conductivity) |
S m-1 |
[TIME_CTD [math]\displaystyle{ ^b }[/math], N_C_SENSORS]
|
GRADT |
temperature_gradient |
|
[TIME, N_GRADT_SENSORS]
|
GRADC |
conductivity_gradient |
|
[TIME, N_GRADC_SENSORS]
|
PITCH |
platform_pitch_angle |
degree |
TIME [math]\displaystyle{ ^a }[/math]
|
ROLL |
platform_roll_angle |
degree |
TIME [math]\displaystyle{ ^a }[/math]
|
[math]\displaystyle{ ^a }[/math] or TIME_SLOW or TIME_CTD
[math]\displaystyle{ ^b }[/math] or TIME_SLOW
return to Dataset requirements for shear probes
go to next: Level 2 data.