|
|
| Line 39: |
Line 39: |
| ! Parameter Name !! Standard Name !! Units of measurement !! dimension | | ! Parameter Name !! Standard Name !! Units of measurement !! dimension |
| |- | | |- |
| | TIME || time || Days since YYYY-MM-DDT00:00:00Z || TIME | | | TIME || time || [http://cfconventions.org/cf-conventions/cf-conventions#time-coordinate CF-Conventions compatible offset]<math>^c</math> || TIME |
| |- | | |- |
| | SHEAR || sea_water_velocity_shear<br /> (or water_velocity_shear) || s-1 || [TIME, N_SHEAR_SENSORS] | | | SHEAR || sea_water_velocity_shear<br /> (or water_velocity_shear) || s-1 || [TIME, N_SHEAR_SENSORS] |
| |} | | |} |
| | <math>^c</math> i.e. "Days since YYYY-MM-DDT00:00:00Z" |
| </div> | | </div> |
|
| |
|
Revision as of 08:37, 27 September 2022
Level 1 data refers to the full resolution data in physical units, e.g. the regularly sampled time series of converted shear probe data. If needed, a transfer function for shear is given. Below, a table with parameters included in the level 1 data set is compiled. The parameter names and definitions fit the NetCDF parameter attributes and data is stored as a NetCDF group with the name "L1_converted".
In the standard names, "sea_water" can be replaced with "water" if working in freshwater environments. This is specified in some entries below but not all.
Dimensions
| Dimension short name |
description
|
| TIME |
length of the record from turbulence (fast) data channels
|
| TIME_*** [math]\displaystyle{ ^a }[/math] |
length of the record from the *** sensor (e.g., CTD or SLOW)
|
| N_SHEAR_SENSORS |
number of shear channel (shear sensors)
|
| N_***_SENSORS [math]\displaystyle{ ^b }[/math] |
number of *** channel (sensors)
|
[math]\displaystyle{ ^a }[/math] Typically we assume TIME for the fast-sampled microstructure channels, and for example, _SLOW or _CTD for slower sampled channels such as CTD and tilt sensors. If the application requires different time stamps for different sensors, this can be utilized like TIME_PITCH, TIME_ACC etc.
[math]\displaystyle{ ^b }[/math] Please use these examples for related sensors:
N_VIB_SENSORS for vibration (piezo-acceleration) sensors,
N_ACC_SENSORS for vibration acceleration sensors,
N_GRADT_SENSORS for thermistors,
N_GRADC_SENSORS for microconductivity sensors.
Required Variables
| Parameter Name |
Standard Name |
Units of measurement |
dimension
|
| TIME |
time |
CF-Conventions compatible offset[math]\displaystyle{ ^c }[/math] |
TIME
|
| SHEAR |
sea_water_velocity_shear
(or water_velocity_shear) |
s-1 |
[TIME, N_SHEAR_SENSORS]
|
[math]\displaystyle{ ^c }[/math] i.e. "Days since YYYY-MM-DDT00:00:00Z"
Optional Level 1 Variables
| Parameter Name |
Standard Name |
Units of measurement |
dimension
|
| PSPD_REL |
platform_speed_wrt_sea_water |
m s-1 |
TIME [math]\displaystyle{ ^a }[/math]
|
| VIB |
platform_vibration |
NA |
[TIME, N_VIB_SENSORS]
|
| ACC |
platform_acceleration |
m s-2 |
[TIME [math]\displaystyle{ ^b }[/math], N_ACC_SENSORS]
|
| TEMP |
sea_water_temperature
(water_temperature) |
degree_Celsius |
[TIME_CTD [math]\displaystyle{ ^b }[/math], N_T_SENSORS]
|
| CNCD |
sea_water_electrical_conductivity
(water_electrical_conductivity) |
S m-1 |
[TIME_CTD [math]\displaystyle{ ^b }[/math], N_C_SENSORS]
|
| GRADT |
temperature_gradient |
|
[TIME, N_GRADT_SENSORS]
|
| GRADC |
conductivity_gradient |
|
[TIME, N_GRADC_SENSORS]
|
| PITCH |
platform_pitch_angle |
degree |
TIME [math]\displaystyle{ ^a }[/math]
|
| ROLL |
platform_roll_angle |
degree |
TIME [math]\displaystyle{ ^a }[/math]
|
[math]\displaystyle{ ^a }[/math] or TIME_SLOW or TIME_CTD
[math]\displaystyle{ ^b }[/math] or TIME_SLOW
return to Dataset requirements for shear probes
go to next: Level 2 data.
