|
|
| Line 51: |
Line 51: |
| |- | | |- |
| | data_mode || D #(D)elayed | | | data_mode || D #(D)elayed |
| | |- |
| | |authors || Names of authors |
| |} | | |} |
| <math>^a</math> or fast_ctd or similar if such records are included | | <math>^a</math> or fast_ctd or similar if such records are included |
| Line 115: |
Line 117: |
| |- | | |- |
| |principal_investigator || Name of Principal Investigator | | |principal_investigator || Name of Principal Investigator |
| |-
| |
| |authors || Names of authors
| |
| |- | | |- |
| |contact || email address of corresponding author (usually principal investigator) | | |contact || email address of corresponding author (usually principal investigator) |
Revision as of 12:05, 16 November 2023
Below we list the metadata required in a NetCDF data file, as well as the optional meta data we highly recommend that are included with the data set.
The parameter names should be used as listed (attention to underscores). The descriptions are example text or several options that are available for that parameter.
Required Metadata
| Parameter Name |
Description
|
| title |
e.g., Vertical micostructure profiler data from cruise XXX
|
| summary |
required by ACDD
|
| comment |
required by CF
|
| platform_type |
research vessel, sub-surface glider etc
|
| creation_time |
netCDF file creation time (required by CF-Standard). Format: yyyy-mm-ddTHH:MM:SSZ
|
| date_created |
same as "creation time". Format: yyyy-mm-ddTHH:MM:SSZ
|
| date_update |
Time of the latest revision: Format: yyyy-mm-ddTHH:MM:SSZ
|
| time_reference_year |
year for time reference
|
| fs_fast |
sampling frequency for fast channels
|
| fs_slow [math]\displaystyle{ ^a }[/math] |
sampling frequency for slow channels
|
| profiling_direction |
horizontal, vertical, glide
|
| fft_length |
as data points (note, fft_lengths_sec in seconds is optional)
|
| diss_length |
as data points
|
| overlap |
(for diss_length) as data points
|
| num_fft_segments |
number of FFT segments
|
| goodman |
0=not applied; 1=applied
|
| HP_cut |
the high-pass filter cutoff frequency in Hz. Can be zero for no filtering.
|
| conventions |
CF-1.6, ACDD-1.3, ATOMIX
|
| history |
Version 1
|
| data_mode |
D #(D)elayed
|
| authors |
Names of authors
|
[math]\displaystyle{ ^a }[/math] or fast_ctd or similar if such records are included
Optional Metadata
| Parameter Name |
Description
|
| fft_length_sec |
seconds
|
| diss_length_sec |
seconds
|
| overlap_sec |
(for diss_length_sec) seconds
|
| f_AA |
Hz, the anti-aliasing frequency.
|
| FOM_limit |
non-dimensional, if absent the FOM QC-flag is not set. Typically, 1.15.
|
| diss_ratio_limit |
non-dimensional, if absent the dissipation ration QC-flag is not set. Typically, 2.77.
|
| despike_shear_fraction_limit |
non-dimensional, if absent the de-spike fraction QC-flag is not set. Typically, 0.05.
|
| despike_shear_iterations_limit |
non-dimensional, if absent the de-spike iteration passes QC-flag is not set. Typically 8.
|
| variance_resolved_limit |
threshold for the minimum percent of variance resolved in a shear spectrum. Typically 50%.
|
| spectral_model |
e.g., Nasmyth, Lueck or Panchev-Kesich
|
| spectrum_std |
statistical uncertainty (standard deviation) of the natural logarithm of spectrum of shear
|
| num_vibration_goodman |
number of vibration or acceleration time series used to clean the shear spectrum
|
| f_limit |
upper limit to exclude frequencies that have contaminations. Typically infinity.
|
| fit_2_isr |
dissipation threshold to use the method of fitting to the inertial subrange. Typically 10-5 W/kg.
|
| eps_remove_top_meters |
if applicable, upper meters removed from dissipation estimates (e.g., because of ship)
|
| area |
e.g., Arctic Ocean, Barents Sea
|
| geospatial_lat_min |
latitude minimum of data
|
| geospatial_lat_max |
latitude maximum of data
|
| geospatial_lon_min |
longitude minimum of data
|
| geospatial_lon_max |
longitude maximum of data
|
| geospatial_vertical_min |
0
|
| geospatial_vertical_max |
in m
|
| geospatial_vertical_positive |
down, up
|
| time_coverage_start |
yyyy-mm-ddTHH:MM:SSZ
|
| time_coverage_end |
yyyy-mm-ddTHH:MM:SSZ
|
| institution |
e.g. University of Bergen
|
| principal_investigator |
Name of Principal Investigator
|
| contact |
email address of corresponding author (usually principal investigator)
|
| project_name |
name of project for which the data was collected
|
| cruise |
name of cruise from which the data was collected
|
| vessel |
name of vessel from which the data was collected
|
| source |
From the SeaVoX Platform Categories vocabulary (L06) list, e.g. “subsurface mooring”, ”ship”, ""sub-surface gliders"", ""autonomous underwater vehicle"" (CF)
|
| references |
key references
|
| keywords |
relevant keywords describing data e.g. shear probes
|
| creator_name |
name of person who generated the file
|
| creator_email |
email address of person who generated the file
|
| creator_url |
website address of the creator
|
| acknowledgement |
acknowledgements for this data. e.g. this could include crew of ship or funders
|
| station_name |
name of station
|
return to Dataset requirements for shear probes
