Level 1 data (shear probes)
From Atomix
Level 1 data (shear probes)
TO DO: Fit the parameter names and definitions to the NetCDF parameter attributes
Level 1 data refers to the full resolution data in physical units, e.g. the regularly sampled time series of converted shear probe data. If needed, a transfer function for shear is given. Below, a table with parameters included in the level 1 data set is compiled.
Numbers in the last column indicate:
- required=1 are the absolute minimum parameter required for a data set
- required=2 are preferred/recommended parameter
- required=3 are optional parameter
| Parameter Name | CF parameter | Standard Name | Units of measurement | dimension | required |
|---|---|---|---|---|---|
| PRES | 1 0 |
sea_water_pressure water_pressure |
dbar | TIME | 1,2 |
| TIME | 1 | time | days since 1950-01-01 00:00:00 UTC | TIME | 1 |
| SHEAR | 0 | water_velocity_shear | s-1 | [TIME, n_shear_sensors] | 1 |
| VIB | 0 | platform_vibration | NA | [TIME, n_vibration_sensors] | 2 |
| ACC | 0 | platform_acceleration | m s-2 | [TIME, n_acc_sensors] | 2 |
| TEMP | 1 (0) |
sea_water_temperature (water_temperature) |
degree_Celsius | [TIME,n_T_sensors] | 2 |
| CNCD | 1 (0) |
sea_water_electrical_conductivity (water_electrical_conductivity) |
S m-1 | [TIME_FAST,n_C_sensors] | 2 |
| GRADT | temperature_gradient | [TIME, n_gradT_sensors] | 3 | ||
| GRADC | conductivity_gradient | [TIME, n_gradC_sensors] | 3 | ||
| PITCH | 1 | platform_pitch_angle | degree | [TIME] | 2 |
| ROLL | 1 | platform_roll_angle | degree | [TIME] | 2 |
