Level 4 data (shear probes)
From Atomix
Level 4 data include the final dissipation estimates as time series, as well as indicators for the quality and accuracy of the estimates and additional derived parameters. Each dissipation estimate in level 4 corresponds to a spectrum in the level 3 data. Consequently, the level 3 and 4 TIME dimensions are the same. Parameter EPSI_FINAL is the final dissipation rate estimate, averaged of the selected estimates (using the QC flags) at that depth.
Dimensions
| Dimension short name | description |
|---|---|
| TIME_SPECTRA | Time axis for the spectral estimates |
| N_SHEAR_SENSORS | number of shear channels |
Required Variables
| Parameter Name | Standard Name | Units of measurement | dimensions | |
|---|---|---|---|---|
| TIME | time | Days since YYYY-MM-DDT00:00:00Z | TIME_SPECTRA | |
| SECTION_NUMBER | dimensionless | TIME_SPECTRA | ||
| PSPD_REL | flow_past_sensor | m s-1 | TIME_SPECTRA | |
| EPSI | specific_turbulent_kinetic_energy_dissipation_in_water | W kg-1 | [TIME_SPECTRA, N_SHEAR_SENSORS] | |
| EPSI_FINAL | specific_turbulent_kinetic_energy_dissipation_in_water | W kg-1 | TIME_SPECTRA | |
| KMAX | maximum_wavenumber_used_for_estimating_turbulent_kinetic_energy_dissipation | cpm | [TIME_SPECTRA, N_SHEAR_SENSORS] | |
| EPSI_FINAL_QC [math]\displaystyle{ ^a }[/math] | dissipation_qc_flag | dimensionaless | TIME_SPECTRA |
[math]\displaystyle{ ^a }[/math] Quality control coding for the final dissipation estimate
Optional Level 3 Variables
| Parameter Name | Standard Name | Units of measurement | dimension |
|---|---|---|---|
| PSPD_REL | platform_speed_wrt_sea_water | m s-1 | TIME_SPECTRA |
| PRES | water_pressure | dbar | TIME_SPECTRA |
| KVISC | kinematic_viscosity_of_water | m2 s-1 | TIME_SPECTRA |
| FOM | figure_of_merit | dimensionless | [TIME_SPECTRA, N_SHEAR_SENSORS] |
| MAD | mean_absolute_deviation | [TIME_SPECTRA, N_SHEAR_SENSORS] | |
| GOOD_PROBE [math]\displaystyle{ ^a }[/math] | probe_flag | dimensionless | TIME_SPECTRA |
[math]\displaystyle{ ^a }[/math] probes used for the final estimate of dissipation rate (e.g., 1:shear probe 1, 2: shear probe 2, 3:both shear probes
