Quality control coding
From Atomix
In progress
Shear-probe quality-control flags
The Q (quality control) flags associated with shear-probe measurements are not compatible with the Ocean Sites Ocean Sites for quality control (QC) coding.
Every dissipation estimate from every probe must have Q flag. The numerical values of the Q flags are as follows:
1, if FOM > FOM_limit
2, if despike_fraction > despike_fraction_limit
4, if |log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon}
8, if despike_iterations > despike_iterations_limit
16, if variance resolved > 50%
32, manual flag defined by user
| Flag | Meaning | Bit |
|---|---|---|
| 1 | if FOM > FOM_limit | Bit 0 |
| 2 | if despike_fraction > despike_fraction_limit | Bit 1 |
| 4 | log(e_max)-log(e_min)|> diss_ratio_limit X \sigma_{\ln\varepsilon} | Bit 2 |
| 8 | if despike_iterations > despike_iterations_limit | Bit 3 |
| 16 | if variance resolved > 50% | Bit 4 |
| 32 | manual flag to be defined by user | Bit 5 |
The Q flags are combined by their addition. For example a Q value of 3 means that the dissipation estimated failed both FOM_limit test and the despike_fraction test. A value of 15 means that all tests failed. A failure of any one test ([math]\displaystyle{ Q\ne0 }[/math]) means that a dissipation test should not be trusted. The reasons for a failure can be decoded by breaking the value of Q down to its powers of 2.
