User:Aleboyer

Dissipation rate estimation

The following items break down the derivation of the turbulent dissipation rate of kinetic energy ([math]\displaystyle{ \varepsilon }[/math]). Explanations for each step can be found after.

1. Extract the section defined in step 2.
2. High-pass filter the shear-probe and (optionally) the vibration data.
3. Identify each diss-length segment in the profile.
4. De-spike the shear-probe data, and track the fraction of data affected by de-spiking within each diss-length segment. This will become a quality-control metric.
5. Calculate the frequency spectra and cross-spectra of shear and vibrations for each diss-length segment using the method described here.
6. Extract the original and the vibration-coherent clean shear-probe frequency spectra.
7. Correct shear and vibration frequency spectra for the high-pass filter.
8. Correct the cleaned frequency spectra for the bias induced by the Goodman algorithm.
9. Convert the frequency spectra into wavenumber spectra using the mean speed for each diss-length segment. That is, make the wavenumber [math]\displaystyle{ \begin{equation}k=f/U\end{equation} }[/math] and the spectrum [math]\displaystyle{ \begin{equation}E(\kappa)=UE(f)\end{equation} }[/math] .
10. Correct the spectra of shear for the wavenumber response of the shear probe.
11. Apply an iterative spectral integration algorithm to estimate the variance of shear, which is described here.
12. Calculate the rate of dissipation by multiplying the shear variance by