Determine the speed of profiling
From Atomix
The speed of profiling can be determined in a variety of different methods but it must be determined because it is required for the conversion of the shear-probe samples into physical units. Methods for determining the speed of profiling include, but are not limited to:
- Using the rate-of-change of pressure for a vertical profiler.
- Using the rate-of-change of pressure, the pitch angle, and the angle of attack for a glider.
- Using a flight model for a glider.
- Using an onboard current meter.
- Using a constant speed.
- Using the speed recorded by an independent instrument after such data have been carefully aligned in time with the shear-probe data.