Data processing of raw measurements
From Atomix
{{#default_form:Processing}}
{{#arraymap:
Velocity point-measurements
|,|x||}}
{{#arraymap:level 1 raw|,|x||}}
The following are specific recommendations for processing raw measurements, which are non-specific to a brand/make of instrument. As such, initial removal of bad data based on recommendations of the instrument manufacturer should be performed first (e.g. removing data with low correlation). Following that, you must:
- Despike the velocity observations
- Phase unwrapping if required
- Identify whether there is interference from the instrument frame, and under which conditions
Return to Flow chart for velocity point-measurements
Continue to Preparing quality-controlled velocities
