Data processing of raw measurements: Difference between revisions
From Atomix
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
* [[Velocity despiking|Despike the velocity observations]] | * [[Velocity despiking|Despike the velocity observations]] | ||
* [[Phase unwrapping]] if required | |||
* Identify whether there is [[interference from the instrument frame]], and under which conditions | * Identify whether there is [[interference from the instrument frame]], and under which conditions | ||
Latest revision as of 22:15, 5 May 2026
{{#default_form:Processing}}
{{#arraymap:
Velocity point-measurements
|,|x||}}
{{#arraymap:level 1 raw|,|x||}}
The following are specific recommendations for processing raw measurements, which are non-specific to a brand/make of instrument. As such, initial removal of bad data based on recommendations of the instrument manufacturer should be performed first (e.g. removing data with low correlation). Following that, you must:
- Despike the velocity observations
- Phase unwrapping if required
- Identify whether there is interference from the instrument frame, and under which conditions
Return to Flow chart for velocity point-measurements
Continue to Preparing quality-controlled velocities
